Bauer Supreme 3S Pro Intermediate Hockey Shin Guards
Free Shipping $100+
Fast Easy Returns
Best Price Promise
Ships Canada Only
The Bauer Supreme 3S Pro INT Hockey Shin Guards target the performance players. These shin pads are designed for the player on the ice roughly 3-4 times a week looking for features that will help their performance, but at a margin of the price of the UltraSonic. Bauer has designed the 3S pro to maximize the player's protection without hindering any mobility or comfort in the shin pad. To pull everything together, Bauer decided black out the entire shin pad. Perfect for hiding sweat!
Shin Protection
The Bauer 3S Pro shin pad features the same anatomically molded shin cap as the Ultrasonic. It is infused with (AMP) Active Motion Protection technology segmentation for effortless bend at the knee. This technology allows you to move freely while still offering elite level protection.
Knee Cap & Protection
The knee cap is equipped with the new ErgoDynamic Lab knee. This provides a deeper fit into the shin pad for full coverage protection. The knee wing, aka the side of the knee, features multi-density foam to cover openings when bending during a stride.
The Bauer 3S Pro also offers a flexible high-density foam thigh protector along the top of the knee cap for added protection when bending your knee.
Calf Protection
The 3S Pro protects the entire calf with a molded polyethylene material. This padding is lightweight and offers elite level protection.
Liner
Bauer’s Thermo Max+ liner is infused with an antimicrobial and sweat management system to keep your body temperature regulated and allow the shoulder pad to dry quickly after use. Additionally, the liner is removable, and easily washable.
Strapping
The anchor straps located along the back of the shin pad allow it to stay locked in place.
Sizes
The Bauer Supreme 3S Pro Intermediate Hockey Shin Guard comes in the sizes 13” and 14”. Check out our size guide to find the perfect fit!
| Feature | Description |
|---|---|
| Calf Protection | Molded Calf Guard w/ PE Insert |
| Category | Performance |
| Knee Cap | ErgoDynamic Lab Knee Cap |
| Liner | Thermo Max+ |
| Removable Liner | Yes |
| Shin Protection | Anatomically Molded w/ AMP Segmentation |
| Side Knee Protection | Medium Density Foam Insert |
| Sizes | 13”, 14” |
| Strapping System | Anchor Straps |
| Warranty | 90 Days |
Bauer Hockey Shin Guards Sizing Chart
Player Shin Guard Sizing Information
When sizing a shin pad, you must determine first if you will wear the shin pad over top of the skate tongue, or if the skate tongue will sit in front of shin pad and “flop” forward. This will determined the length of the shin pad you will want.
Your knee should fit directly into the center of the kneecap, which is usually lined and padded to help direct it and provide comfort. Once the pad is strapped to your leg, it should be secure and snug and should NOT be able to twist rotate or slide freely. There are many strapping systems offered and you must decide what you like and dislike. On some models you will find anchor straps or thicker straps which can offer a better more secure fit. Anchor straps are made up of a stretchy knit material and usually fasten above or below the calf muscle. These straps are designed to anchor the pad in place and not allow it slide up or down. Thicker straps across the calf wrap/guard are also often used, these straps help provide full protection to your leg ensuring that the calf guard reaches across your leg.
Keep in mind that as you go up in price you will usually see more adjustments, options and higher density foams and technologies used. You must determine within your budget, which shin pad offers the most features that you want, as well as provides the most comfort.
Sizing a Shin Pad over top of your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number up to the next whole number (i.e. 13.2” becomes 14”). Because the shin pad is sitting over top of the skate tongue, it enables your to wear a slightly bigger pad without compromising mobility. This is usually seen as an upside because you get extra protection in areas like the tongue of your skate.
If you are sizing a player and want to include growth room, we do recommend this method as well, because it allows for a bigger pad to be worn, again without compromising motion or mobility.
Sizing a Shin Pad underneath your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number down to the next whole number (i.e. 13.7” becomes 13”). Because the shin pad is shipping underneath the skate tongue, the pad will not be able to sit right against the edge of the skate and thus a slightly shorter shin pad is used. If a shin pad that is too big is tried on, you will notice that the shin pad is shifted up and the kneecap falls out of the designated spot. If this happens your shin and knee will not be properly protected and you are more susceptible to having your shin pad rotate or more as well.
Compare your height, weight and age to the charts provided to find your best fit. As well, use the measurement that was taken above to compare to the provided charts. Another good estimation is to look at your old/existing shin pads to see what size they are. If you are growing and have outgrown them, then next size up is probably for you. If you liked the way your shin pads felt, it may be smart to continue with the same size.
